|PS-Engineering's Interactive agreement|
Thank you for visiting our Web site. Access to and use of this Internet Web site (referred to as this "Site") is governed by the terms and conditions set
forth below, as well as any applicable laws, statutes, ordinances and regulations. By browsing, visiting or otherwise accessing or using this Site, you
agree to abide by the terms and conditions set forth below. As used in this Site, the term "PS-Engineering" is intended to include PS-Engineering
This Site is protected by the copyright laws of the United States of America, 17 U.S.C. §§ 101 et seq., and may be protected by the copyright laws of
other countries and jurisdictions as well. Except as specifically permitted in accordance with the terms and conditions governing use of this Site, any
copy, other reproduction, display, performance or retransmission of all or any of the contents of this Site is strictly prohibited. All rights reserved. Please
see the section below entitled "Notice Concerning the Use of Documents, Images and Information on this Site."
"PS Engineering, Inc", "IntelliVox", "The Muse",
"aerocom" and "Flying Never Sounded
So Good" are registered trademarks of PS-Engineering Inc.
"Soft-Mute" and "Karaoke-Mode", are trademarks of PS Engineering, Inc. as specifically permitted in accordance with the terms and
conditions governing use of this Site, any use of such trademarks or trade names is strictly prohibited absent the prior written consent of PS Engineering
Inc.. In addition, the names, trade names and/or trademarks of third parties, including clients of PS Engineering Inc., may appear on this Site from time
Use This Site at Your Own Risk
Every user who visits this Site does so at her or his own risk. PS Engineering Inc. makes no representations or warranties of any kind as to (a) the accuracy
or completeness of the information or materials contained in this Site, and assumes no responsibility for any errors or omissions in the contents of this Site
(which may include factual or typographical errors and/or technical inaccuracies); (b) the availability for use of any copyrighted, trademark or otherwise
proprietary materials of third parties which may appear in this Site; (c) the presence or absence of computer viruses or other bugs which third parties may
embed in or attach to this Site without PS Engineering Inc.'s knowledge or consent; (d) any software made available for downloading, copying or other use
through this Site; or (e) the merchantability, fitness for use, title and/or non-infringement of any or all of the contents of this Site. Regarding communications
with PS Engineering Inc. through this Site, PS Engineering Inc. makes no representation or warranty concerning the security of any data transmitted to
PS Engineering Inc., including information relating to potential employment or applications
therefore, or any other matter. PS Engineering Inc. shall treat
any data or information transmitted to PS Engineering Inc. through this Site as non-confidential and non-proprietary. Neither PS Engineering Inc. nor any
other party involved in the creation, production or delivery of this Site, or whose materials or information appear in this Site assumes or accepts any liability,
regardless of whether based on contract, negligence, intentional wrongdoing or liability without fault, for any costs, losses, damages (whether direct, indirect, compensatory, special, lost profits, liquidated, consequential or punitive), arising out of or in any way in connection with the user's access to, browsing of or use of this Site or any of the contents of this Site, without regard to the source of such contents, or with the unavailability or failure of performance of this Site for any reason.
Notice Concerning the Use of Documents, Images and Information on This Site
Documents, Images and Information Proprietary to PS Engineering Inc.
Documents, images and information proprietary to PS Engineering Inc., including the contents of descriptions of PS Engineering Inc.'s businesses,
biographical descriptions of its representatives and personnel, press releases and other public notices, together with any associated graphic elements
(collectively referred to as "PS Engineering Inc. Materials"), may be copied, reproduced, downloaded or otherwise used provided the following terms are
adhered to strictly: Copyright notice in the form "© 2013 PS Engineering Inc.. Used With Permission. All Rights Reserved." must appear in every copy or
reproduction of such PS Engineering Inc. Materials. The PS Engineering Inc. Materials may be used solely for non-commercial purposes such as
informational, entertainment and personal use, and shall not be further copied, uploaded to any network, intranet or Internet, rebroadcast or retransmitted,
or otherwise disseminated in any medium without the express written permission of PS Engineering Inc.. The PS Engineering Inc. Materials may only be
used in their entirety, without alteration, editing, condensation or editorial comment, and any graphical elements contained in the PS Engineering Inc.
Materials may not be used separately from the other elements with which they are associated. The PS Engineering Inc. Materials shall not be used to
ridicule, disparage, harass or annoy any client of PS Engineering Inc..
No other use of PS Engineering Inc. Materials shall be permitted. The PS Engineering Inc. Materials available for use as set forth above do not include
the design, layout, arrangement or distinctive elements of this Site, or of any other Internet Web site maintained by PS Engineering Inc. or its divisions,
subsidiaries or affiliated companies.
Documents, Images, Information and Other Materials Proprietary to Others
The contents of this Site may from time to time contain documents, images, information and other materials not proprietary to PS Engineering Inc., such
as photographs, clip art, film clips, musical passages, audio track or sound effect elements, or the names, trade names, trademarks, logos or designations
of third parties (including present and past clients of PS Engineering Inc. or its featured personnel). All such materials will be referred to as "Non-PS
Engineering Inc. Materials." Non-PS Engineering Inc. Materials may also include from time to time articles, data, information, images, artwork, graphics,
music, audio or other elements published in newspapers, magazines or other media or venues, and may include the name, trade name or trademark of
the medium or venue in which such materials were published. Any use whatsoever of any Non-PS Engineering Inc. Materials is strictly prohibited unless
the prior written permission of the appropriate third parties has been secured.
For the convenience of users of this Site, one or more links to other Internet Web sites may appear from time to time. Except for Internet Web sites
maintained by PS Engineering Inc., the Internet Web sites to which links are provided in this Site are
not under the control of PS Engineering Inc.. PS Engineering Inc. assumes no responsibility for the contents of any non-PS Engineering Inc.-linked
Internet Web site, or for any potential damage arising out of or in connection with the use of any such link. In addition, the existence of a link between
this Site and any other Internet Web site is not and shall not be understood to be an endorsement by PS Engineering Inc. of the owner or proprietor of
the linked Internet Web site, nor an endorsement of PS Engineering Inc. by the owner or proprietor of such linked Web site.
Please note that it is a policy of PS Engineering Inc. not to accept or consider unsolicited creative, production-related or other materials of any kind. PS
Engineering Inc. will consider any and all materials, including proposals, ideas, concepts, drafts, rough cuts or finished work product submitted through
this Site, not to be confidential or proprietary and to be freely available for use without compensation or payment of any kind.
Any software made available for downloading, copying or use through this Site is proprietary to the individual or entity making such software available.
Downloading, copying or other use of such software is subject to the terms and conditions of the software licensing agreement relating to such software.